Specifications - JVC KV-RA2 Manual De Instrucciones

AMPLIFIER SECTION
Maximum power output:
Front: 40 watts per channel
Rear: 40 watts per channel
Continuous power output (RMS):
15 watts per channel into 4 Ω,
Front:
40 to 20,000 Hz at no more
than 0.8% total harmonic
distortion.
15 watts per channel into 4 Ω,
Rear:
40 to 20,000 Hz at no more
than 0.8% total harmonic
distortion.
Load impedance: 4 Ω (4 to 8 Ω allowable)
Frequency response: 40 to 20,000 Hz
Line input sensitivity/Impedance:
0.5 V/20 kΩ
Speaker input sensitivity/Impedance:
4 V/1.5 kΩ
Signal-to-signal ratio: 70 dB

SPECIFICATIONS

GENERAL
Power requirements:
Operation voltage:
DC 14.4 V (11 V – 16 V allowable)
Grounding system: Negative ground
Dimensions (W x H x D):
Amplifier unit: 200 x 162 x 30 mm
Display unit: 104 x 40 x 20 mm
Mass:
Amplifier unit: 750 g
Display unit: 240 g
Design and specification subject to change without
notice.
11