Vcr Operations - JVC KV-RA2 Manual De Instrucciones

You can connect a JVC VCR (ex. KV-V10).
Before you start....
• Turn on a monitor set or TV set connected to the VCR and set it to its external input to watch
picture from the VCR.
• Insert a video tape into the VCR.
1
Display unit
FUNC 7/RN
/
I ATT
/
2 Remote controller only
Note:
Even if you change the source to CD changer or car receiver (AUX) while watching a video tape, VCR
playback continues, but the sound does not come out of the speakers.
To stop video playback
Display unit
FUNC 7/RND/RPT 3
/
I ATT
/
To fast-forward or rewind a video tape
Note:
If you press the buttons while watching the video tape, you can search for a particular scene by fast-
forwarding or rewinding.
To turn off the VCR
Press .
Notes:
• Even if you are selecting CD changer or car receiver (AUX) as the source, you can operate the VCR
by using the buttons of the remote controller.
• Use the remote controller supplied with the VCR for operations except the above operations. (See the
instructions supplied with the VCR.)

VCR OPERATIONS

Remote controller
Press .
The VCR turns on.
Remote controller
Press FUNC (function) repeatedly
until "VCR" appears on the display.
BBE
BAS TRE
FAD BAL
RND RPT
3
Press 7.
Press ¡ or ¢.
Press 1 or 4.
Press 3.
The VCR starts
playing a video
tape.
7