Residual Risks; Additional Specific Safety Rules - BTI PROFILINE 37629 Instrucciones De Manejo

d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specifi ed by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fi re when used
with another battery pack.
b) Use power tools only with specifi cally designated
battery packs. Use of any other battery packs may
create a risk of injury and fi re.
c) When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fi re.
d) Under abusive conditions, liquid may be ejected
from the battery, avoid contact. If contact
accidentally occurs, fl ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
6) SERVICE
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

ADDITIONAL SPECIFIC SAFETY RULES

Drill/Driver/Hammerdrill Safety Warnings
• Wear ear protectors with impact drills. Exposure
to noise can cause hearing loss.
• Hold power tools by insulated gripping surfaces
when performing an operation where the cutting tool
may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the tool "live" and shock the operator.
• Use auxiliary handles supplied with the tool. Loss
of control can cause personal injury.
• Use clamps or other practical way to secure and
support the workpiece to a stable
platform. Holding the work by hand or against your
body is unstable and may lead to loss of control.
• Wear ear protectors when hammering for
extended periods of time. Prolonged exposure
to high intensity noise can cause hearing loss.
Temporary hearing loss or serious ear drum damage
may result from high sound levels generated by
hammerdrilling.
• Wear safety goggles or other eye protection.
Hammering and drilling operations cause chips to fl y.
Flying particles can cause permanent eye damage.
• Hammer bits and tools get hot during operation.
Wear gloves when touching them.

Residual Risks

The following risks are inherent to the use of drills:
- injuries caused by touching the rotating parts or hot
parts of the tool.
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These are:
- Impairment of hearing.
- Risk of squeezing fi ngers when changing accessories.
- Health hazards caused by breating dust developed
when working in wood.
- Risk of personal injury due to fl ying particles.
- Risk of personal injury due to prolonged use
Markings on tool
The following pictograms are shown on the tool:
Then add the read manual icon (man reading book) and
put the following sentence next to it:
Read instruction manual before use.
DATE CODE POSITION
Date Code, which also includes the year of manufacture,
is printed into the housing surface that forms the
mounting joint between tool and battery!
Example:
Year of Manufacture
51
E N G L I S H
2009 XX XX