Care And Cleaning Guide; Cleaning And Maintenance; Washing The Lint Screen - Haier GDE480BW Manual Para El Usuario

CARE AND CLEANING GUIDE

Always unplug your dryer to avoid electric shock before cleaning.
Ignoring this warning may result in death or injury.
Before using cleaning products, always read and follow manufacturer's
instructions and warnings to avoid personal injury or product damage.

CLEANING AND MAINTENANCE

•
Only use a damp or sudsy cloth for cleaning the control panel.
•
If you spill liquid/powdered softener, bleach or detergent on the cabinet, wipe
the cabinet immediately to avoid damage to the fi nish.
•
Do not use abrasive cleansers, harsh chemicals, ammonia, chlorine bleach,
concentrated detergent, or solvents to clean the washer. These chemicals may
dissolve, damage, or discolor the dryer.
•
Do not use any type of spray cleaner when cleaning the dryer interior.
Hazardous fumes or electric shock could occur. If dryer drum becomes stained,
clean the drum with a damp cloth. Remove any residue before drying next load.

WASHING THE LINT SCREEN

•
Laundry detergent and fabric softener residue can build up on the lint screen.
This buildup can cause longer drying times, or cause the dryer to stop before
your load is completely dry.
•
Wash the lint screen every 6 months, or sooner, if it becomes clogged due to a
residue buildup.
Steps to Wash the Lint Screen:
1. Remove the normal accumulation of lint with your fi ngers.
2. Wet both sides of lint screen with hot water.
3. Apply liquid detergent with water and scrub with a nylon brush.
4. Thoroughly rinse the lint screen with hot water.
5. Completely dry the lint screen before reinstalling and using the dryer.
26
WARNING