Before Use; Operation; Basic Functions - Hilti PSA 100 Manual De Instrucciones

d) Although the appliance is protected against the
entry of moisture, it should be wiped dry before
being put away in its transport container.
e) Do not open the casing or modify the device in
any way.
3.6 Precautions for handling and using batteries
a) Keep batteries out of reach of children.
b) Remove the battery from the device if it is to remain
unused for some time.

4 Before use

4.1 Inserting the battery pack and switching the tool on 2 3
1. Insert the PSA 82 battery pack in the back of the tool.
2. Fully charge the PSA 82 battery pack (please refer to the operating instructions for the PUA 81 mains adapter,
the PSA 82 battery pack and the PUA 82 charger for use in motor vehicles).
NOTE Alternatively, the PSA 82 battery pack can be removed from the PSA 100 monitor and charged using the
separately available PSA 85 charger.
3. Switch the tool on by pressing the on/off button.
4. You must accept the terms of the disclaimer notice displayed on the screen before the tool can be operated.
5. To switch off, press and hold the on/off button for 3 seconds.
4.2 Settings
When operating a brand new tool you will first be requested to select the country-specific settings.
1. Use the 4-way controller to select the desired language and confirm your choice by pressing the "OK" button.
2. Make further settings using the 4-way controller and the "OK" button.
3. Use the "OK" button to confirm the settings made.
NOTE You can also use the "Skip" button to skip making these settings until the next time the tool is switched
on.

5 Operation

5.1 Displaying the operating instructions
1. Press the "Home" button for 5 seconds.
The operating instructions will be shown in the right context in the display. You can then browse through the
complete operating instructions.
2. The operating instructions can also be displayed by way of the settings menu in the main menu by pressing the
Help function button.
3. To close the operating instructions, press the Back function button.

5.2 Basic functions

The function buttons can be used to select the available functions.
c) Do not expose the battery to high temperatures
or fire. This may cause the battery to explode or
release toxic substances.
d) Under abusive conditions, liquid may be ejected from
the battery, Avoid contact. If contact accidentally
occurs, flush with water. In the event of the liquid
coming into contact with the eyes, rinse the eyes
with plenty of water and consult a doctor. Liquid
ejected from the battery may cause irritation or burns.
e) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for a certain
type of battery may present a risk of fire when used
with other types of battery.
Observe the special guidelines applicable to the
f)
transport, storage and use of Li-ion batteries.
g) Do not use damaged batteries.
en
9