Operation And Use - Fakir IC 1009 Instrucciones De Uso

IC 1009-8710:IC 1009-8301.QXD
A
• Plugs directly into any 12 volt power supply (C), perfect for automobile or boat.
• To switch on, push the on/off switch (4) forward and hold it in that position. It can now
be used to vacuum dirt and dust. The motor will stop automatically when you release
the on/off switch.
Crevice nozzle (A)
Upholstery brush (B)
You are recommended to empty the filter after every vacuuming operation:
• Press the release button (6) and pull the suction nozzle (1) off upwards while swive-
ling it.
• Remove the filter (2) from the suction nozzle.
• Shake the dust and dirt of the suction nozzle and of the filter into a refuse bin.
• In the case of stronger contamination of the filter and of the suction nozzle you can
wash this with a mild cleaning agent. Make sure that the filter and suction nozzle are
completely dry before renewed use.
• Insert the filter in the suction nozzle and fit the suction nozzle back on the motor com-
partment (3) until it snaps noticeably into place. Your vacuum cleaner and now ready
again.
09.10.2007 11:14 Seite 7

operation and use

B
Can be used to vacuuming deep slots in upholstery, skirting
boards, ledges, corners etc.
Can be used to clean upholsterd furniture etc.
C
12 V
1 dust compartment
2 dust filter
3 motor compartment
4 onn-off-switch
5 connecting cable 2,5 m
6 release button
7 12 V cigarette plug
7