Troubleshooting - babymoov Babyphone Visio Care 2 Instrucciones De Uso

Problem
• No audio or video signal
is transmitted
• Permanent transmission
• Alarm out of range
permanently activated
• The image on the screen
is not homogeneous or is fixed
or appears in black and white
• Batteries uncharged
signal still displayed
• Lots of static noise and interference
• Range of action too small
20
TROUBLE SHOOTING
Possible Causes
• The microphone's sensitivity is too low
• The batteries are exhausted or the mains
adapter is not connected correctly to the
transmitter
• The microphone's sensitivity is too high
• The transmitter batteries are exhausted
• The distance between the transmitter and
the receiver exceeds the range of action
• The limits of the range of action have been
reached
• The light intensity is too weak in the baby's
room; the unit functions in night vision mode
and so uses the infrared LEDs as lighting
source
• The batteries are uncharged
• The rechargeable batteries are damaged
• The transmitter is placed beside
other electric appliances
• There must be a lot of partitions between the
receiver and the transmitter
• The transmitter batteries are exhausted
BABYPHONE VISIO CARE 2 • Instruction manual
Solutions
• Increase the microphone's sensitivity by
means of the adjustment system
• Replace the batteries or verify the
connection
• Diminish the microphone's sensitivity by
means of the adjustment system so that the
transmitter is activated by the voice
• Replace with new batteries or use the mains
adapter supplied
• bring the receiver and the transmitter closer
together
• Move the receiver closer to the camera
• Increase the light in the baby's room
• Recharge the transmitter battery with the
mains adapter supplied
• Replace the batteries
• Replace the rechargeable batteries with new
batteries
• Remove the electric appliances
or the transmitter to remove the source
of interference or select another channel
• Move the transmitter and the receiver
• Replace with new batteries or the mains
adapter supplied