Cleaning And Maintenance - Waeco VAS6380B Instrucciones De Montaje

VAS6380B/VAS6381B
✓ The station will scan the USB stick for a later version. If the software
on the USB stick is more up-to-date, the following menu is displayed:
If the database on the USB stick is more up-to-date, the following
menu is displayed:
The current version is displayed in black on the bottom line.
3. Press ENTER to update the software or database.
✓ The station shows the progress of the update:
After the update, the station sets the default settings:
The station then restarts and the standby menu appears.
4. Remove the USB stick.
✓ The station is ready for operation.
9.10

Cleaning and maintenance

 Clean the exterior of the device with a damp cloth as required. If
necessary, use a small amount of dishwashing detergent. Do not use
solvents or scouring agents.
 Check the service hoses (10) and (11) and the service couplings (12)
and (13) for damage regularly. Do not start up the
AirConServiceCenter if it is damaged.
EN
New firmware release
found
ENTER upgrade STOP EXIT
VA200034
New database release
found
ENTER upgrade STOP EXIT
lhd10028
Wait...
Erase flash... Erased!
Writing
Wait!
loading default
parameters
1 63488
7% 762751
Service tasks
107