Control Elements - Dometic ACX Serie Instrucciones De Uso

Technical description
5.1 Connections
No. in
fig. 2, page 4
1
2
3
4
5
6
5.2

Control elements

No. in
fig. 3, page 5
1
2
3
When the cooler is connected to the AC mains, the required cooling level is set using
the cooling level controller (1).
➤ To increase the cooling level, turn the cooling level controller (1) clockwise.
For the maximum cooling level, turn the cooling level controller (1) clockwise as
far as it will go (position "7").
➤ To decrease the cooling level, turn the cooling level controller (1) anticlockwise.
➤ To switch the cooler off, turn the cooling level controller (1) anti-clockwise as far
as it will go (position "0").
When the cooler is connected to the DC power socket the cooling level cannot be
adjusted.
When the cooler is operated with gas, the required cooling level is set using the
temperature controller (2).
16
Description
AC connection cable
DC connection cable
Cover for control elements
Gas connection port (ACX35, ACX40 only)
Gas cartridge (ACX40G only)
Pilot light sight glass
Description
Cooling level controller
Temperature controller
Ignition button
ACX35, ACX40, ACX40G
EN