Hitachi DH 28PD Manual De Instrucciones página 21

5. Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank)
Code No. 316657
Cutter (SDS-plus shank)
Code No. 316658
6. Grooving (Hammering only)
Grooving chisel (SDS-plus shank)
Code No. 316659
7. Bolt placing operation with Chemical Anchor (Hammering only)
Standard socket
on the market
8. Drilling holes and driving screws (Rotation only)
Drill chuck, chuck adaptor and chuck wrench
Special screw
Code No. 981122

(SDS-plus shank)

1/2" (12.7 mm) Chemical
Anchor Adapter
(Code No.303044)
3/4" (19 mm) Chemical
Anchor Adapter
(Code No. 303045)
Drill chuck (13VLRB–D)
(includes chuck wrench)
Code No. 321814
Chuck wrench
Chuck adaptor G
(SDS-plus shank)
Code No. 303623
English
21