Kreg Jig K4 Manual De Instrucciones página 6

Kreg Jig
To create the strongest joint possible, you'll need
to set your jig to match the thickness of your
workpiece. The Kreg Jig
three simple steps!
1
Depth Collar Adjustment
To get the right Pocket-Hole depth, you'll have to
adjust the position of the collar on the drill bit. Place
your bit inside the Depth Setting Gauge on the Kreg
®,
Jig with the step of the bit at the marking which
matches your workpiece thickness, as shown. Slide the
Depth Collar towards the jig base and lock it in place
with the included Allen Wrench.
800-447-8638
®
Settings
®
makes this easy, in just st
For 3/4" material, place the step of the bit
at the 3/4" marking and tighten depth collar.