auna Verticalo SE Manual De Uso página 17

NOTE: Power saving function
To help save power consumption, if there is no audio signal input
for 20 minutes while the unit is powered on, the unit will off power
automatiically. To turn power back on and resume playing. you will need to
turn off the power first and turn it back on to continue.
BT operation
1. Turn on the unit by rotating the volume knob.
2. The BT function is setting as acquiescent function when turning on
the unit. Make sure the tone-arm is on the resetting state. A short BT
starting tone can be heard. then the BT indicator will be flashing.
3. Turn on your BT device and scan. It will be displayed as „Verticalo-
SE" when discovered by your BT device. Enter password „0000"
during pairing if necessary.
4. When the unit is paired with your BT device, you can hear a short
tone from the speakers.
5. Play your BT device as you normally do and the sound will be played
from this unit .Then you may enjoy the music.
Notes:
1. Make sure your BT device and this unit is within 10 metres.
2. Check and see if there are other BT devices nearby interfering the
signal and connection.
3. This unit is could be paired by multiple different BT devices, but
could only be connected and played by one of them at a time. Make
sure no others device is actively connected to it already when you
are trying to connect the one you are working on.
EN
17