Replacing The Filter; Removing The Filter; Technical Specification - DeLonghi ECAM23210B Manual De Uso

bubbles to escape (fig� 31)�
5� Insert the filter in the filter housing (fig� 32A)
and press as far as it will go�
6� Close the tank with the lid (fig� 32B), then
replace the tank in the machine�
When you install the filter, you must notify the
appliance of its presence�
7. Press the P button to enter the menu;
8� Turn the selection knob until the
lights come on�
9. Press the ok button�
10. Press the button to confirm the selec-
tion�
11. Place a container (min. capacity: 100 ml) un-
der the cappuccino maker�
12� Turn the steam knob and press the
ton�
13� At the end of delivery, the
Close the knob and the appliance returns au-
tomatically to the "ready for coffee" state�
The new filter is active and you can now use the
coffee maker�

Replacing the filter

When the light flashes, after two months
(see date indicator) or when the appliance has
not been used for 3 weeks, you should replace
the filter:
1� Remove the old filter;
2� Remove the new filter from the packaging�
3� Turn the date indicator disk (see fig� 30) until
the next 2 months of use are displayed (the
filter lasts about two months);
4� Refill the tank;
5� Insert the filter in the water tank and immer-
se it completely, sloping it to enable the air
bubbles to escape (fig� 31);
6. Place the filter in the filter housing (fig. 32A)
and press as far as it will go� Close the tank
with the lid (fig� 32B), then replace the tank
in the machine;
7. Place a container (min. capacity: 100 ml) un-
der the cappuccino maker�
8. Press the P button to enter the menu;
9� Turn the selection knob until the
lights come on�
10. P ress the button� The ok light flashes�
11. Press the button to confirm the selec-
tion�
12� Turn the steam knob and press the
13� At the end of delivery, the
The new filter is now active and you can use the
coffee maker�

Removing the filter

and If you want to continue using the appliance wi-
thout a filter, you must remove it and notify the
appliance of its removal as follows:
1� Extract the tank and exhausted filter;
2. Press the P button to enter the menu;
3� Turn the selection knob (fig� 8) until the
4. Press the
but-
5. Press the
light flashes�
6. Press the

teChnICAl sPeCIFICAtIon

Voltage:
Absorbed power:
Pressure:
Water tank capacity:
Size LxHxD:
Cable length:
Weight:
Coffee beans container capacity: 5,3 oz� max�
and
18
button�
Close the knob and the appliance returns au-
tomatically to the "ready for coffee" state�
and lights come on;
button� The ok light flashes;
button to confirm use of the
appliance without the filter;
button to exit the menu�
light flashes�
120V~ 60Hz
1350W
15 bars
50�7 fl� oz� max�
2,38x3,4x4,3 in�
11 ft�
20,22 lb�