Replacing The Filter; Removing The Filter; Technical Specification - DeLonghi ECAM23210B Instrucciones Para El Uso

Ocultar thumbs Ver también para ECAM23210B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

bubbles to escape (fig. 31).
5. Insert the filter in the filter housing (fig. 32A)
and press as far as it will go.
6. Close the tank with the lid (fig. 32B), then
replace the tank in the machine.
When you install the filter, you must notify the
appliance of its presence.
P button to enter the menu;
8. Turn the selection knob until the
lights come on.
OK button.
button to confirm the selec-
tion.
der the cappuccino maker.
12. Turn the steam knob and press the
ton.
13. At the end of delivery, the
Close the knob and the appliance returns au-
tomatically to the "ready for coffee" state.
The new filter is active and you can now use the
coffee maker.
Replacing the filter
When the
light flashes, after two months
(see date indicator) or when the appliance has
not been used for 3 weeks, you should replace
the filter:
1. Remove the old filter;
2. Remove the new filter from the packaging.
3. Turn the date indicator disk (see fig. 30) until
the next 2 months of use are displayed (the
filter lasts about two months);
4. Refill the tank;
5. Insert the filter in the water tank and immer-
se it completely, sloping it to enable the air
bubbles to escape (fig. 31);
and press as far as it will go. Close the tank
with the lid (fig. 32B), then replace the tank
in the machine;
der the cappuccino maker.
P button to enter the menu;
9. Turn the selection knob until the
lights come on.
button. The OK light flashes.
button to confirm the selec-
tion.
12. Turn the steam knob and press the
button.
13. At the end of delivery, the
Close the knob and the appliance returns au-
tomatically to the "ready for coffee" state.
The new filter is now active and you can use the
coffee maker.
Removing the filter
and
If you want to continue using the appliance wi-
thout a filter, you must remove it and notify the
appliance of its removal as follows:
1. Extract the tank and exhausted filter;
3. Turn the selection knob (fig. 8) until the
-
and
but-
light flashes.
appliance without the filter;

TECHNICAL SPECIFICATION

Voltage:
Absorbed power:
Water tank capacity:
Size LxHxD:
Cable length:
Weight:
Coffee beans container capacity: 5,3 oz. max.
-
and
18
light flashes.
P button to enter the menu;
lights come on;
button. The OK light flashes;
button to confirm use of the
button to exit the menu.
120V~ 60Hz
1350W
50.7 fl. oz. max.
2,38x3,4x4,3 in.
20,22 lb.
11 ft.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ecam23210sb

Tabla de contenido