Cleaning And Maintenance - Dometic Waeco CoolMatic MDC-50 Instrucciones De Uso

COOLMATIC MDC Series
8

Cleaning and maintenance

Caution!
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooling device.
Caution!
Never use brushes, scouring pads or hard or pointed tools to
remove ice or to loosen objects which have frozen in place.
➤ Clean the cooling device regularly as soon as it becomes dirty with a
damp cloth.
➤ Make sure that no water drips into the sealings. This can damage the
electronics.
➤ Wipe the cooling device dry with a cloth after cleaning.
9 Guarantee
The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following
documents when you send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
10 Disposal
Caution!
When disposing of the device, make sure it is not overheated, as
the insulating foam was made with flammable gas.
➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
Cleaning and maintenance
33