Ottobock 21A47 Serie Instrucciones De Uso página 19

15
6.4 Removal
Complete the following steps to take off the product:
1) Open the hook-and-loop closure on the shoulder.
2) Pull the arm out of the shoulder loop.
3) Fasten the hook-and-loop closure on the shoulder.
4) Pull the residual limb out of the socket.
INFORMATION
For putting it on the next time, the sleeve of the product does not have to be pulled off the pros­
thesis.
7 Cleaning and care
► INFORMATION: Fasten all hook and loop closures before washing.
1) Wash the product at 30 °C/86 °F in a washing machine (setting: easy care or delicates).
2) Allow the product to fully air dry.
INFORMATION
Note the washing symbols on the label.
INFORMATION
Drying may take between 12 and 24 hours. A second product for changing is recommended.
8 Legal information
8.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregard of this document, particularly due to improper use or unauthorised
modification of the product.
8.2 CE Conformity
This product meets the requirements of the European Directive 93/42/EEC for medical devices.
This product has been classified as a class I device according to the classification criteria out­
lined in Annex IX of the directive. The declaration of conformity was therefore created by the man­
ufacturer with sole responsibility according to Annex VII of the directive.
12) Check the seam by pulling on the strap.
13) Apply the product to the patient. Check the
product for stable and comfortable fit.
19