Structure Of The Safety Instructions; General Safety Instructions; Scope Of Delivery And Accessories - Ottobock 21A47 Serie Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39

4.2 Structure of the safety instructions

CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
>
E.g.: Consequence 1 in case of failure to observe the hazard
>
E.g.: Consequence 2 in case of failure to observe the hazard
This symbol identifies activities/actions that must be observed/carried out in order to avert
the hazard.

4.3 General safety instructions

NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage.
Use caution when working with the product.
If the product is damaged, check it for proper function and readiness for use.
Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
customer service, etc.).
NOTICE
Improper product care
Damage to the product due to the use of incorrect cleaning agents.
Clean the product only as described in the section "Cleaning and care" (see Page 19).
NOTICE
Improper assembly/disassembly of the product
Damage to the product.
Observe the process steps, instructions and required tools in the section "Preparation for
use".
Instruct the patient in the proper disassembly/ assembly of the product.
NOTICE
Independent user changes or modifications made to the product
Damage to the product.
Manipulations to the product other than the tasks described in these instructions for use are
not permitted.

5 Scope of Delivery and Accessories

1 pc. Transhumeral soft harness L/R
1 pc. Sewing silk (100 m)
1 pc. 647G1279 Instructions for use (qualified personnel)
1 pc. 647G1267 instructions for use (user)
14

Publicidad

Tabla de contenido
loading

Tabla de contenido