Signs And Symbols; Getting To Know Your Device - Beurer LR 330 Instrucciones De Uso

Table of contents
1. Getting to know your device................... 14
2. Intended use ............................................ 15
3. Notes ........................................................ 15
4. Device description ................................... 17
5. Initial use .................................................. 18
5.1 Removing the air cleaner ..................... 18
5.2 Setting up the air cleaner .................... 18
5.3 Preparing for the application ............... 18
6. Operation .................................................. 19
6.1 Switching on the air cleaner ............... 19

Signs and symbols

The following symbols appear in these instructions for use:
WARNING
Warning instruction indicating a risk of injury or damage to health
IMPORTANT
Safety note indicating possible damage to the device/accessory
Note
Note on important information

1. Getting to know your device

Humans spend a large proportion of their time indoors. The air indoors is often polluted with dust particles,
pollen, animal hair, odours, harmful gases as well as various bacteria and viruses and, particularly in winter,
is also too dry. Ambient air that is too dry and contaminated may have a number of negative effects. The
LR 330 air purifier humidifies air that is too dry and simultaneously cleans the air with a 3-layer filter system.
The LR 330 air purifier
• Washes and humidifies air particularly hygienically
• Filters air with a combi filter (Activated carbon filter against harmful gases and unpleasant odours, HEPA
filter E 10 against particles such as bacteria, viruses, mites, pollen and fine dust)
• Operates quietly with three output levels
• Can humidify a room up to a preset target humidity (e.g. 55% air humidity)
• Has a timer function (1 to 12 hours)
• Suitable for rooms up to 35 m² in size
• Consumes little energy and automatically switches off if the water runs out
Principle of air cleaning
1. The quiet and low-energy fan sucks the contaminated air in from the side air inlet.
2. The contaminated air is pre-cleaned by the built-in combi filter (activated carbon filter/HEPA filter). In ad-
dition, the pre-filter filters larger particles and hairs (in general) from the air.
3. The air passes over the disc set that continuously rotates in the tray and picks up calcium-free humidity.
4. The cleaned air that is enriched with water is emitted via the air outlet on top of the Air purifier into the
ambient air.
The HEPA E 10 filter has a filter performance of 85%. That means that 85% of particles (e.g. bacteria,
viruses and fine dust) can be filtered out.
6.2 Timer function .................................... 19
6.3 Selecting the humidity level ................ 19
6.4 Setting the target humidity ................. 19
6.5 Empty water tank ............................... 19
6.6 Replacing the combi filter and pre-filter . 20
7. Cleaning and storage .............................. 20
8. What if there are problems? ................... 22
9. Disposal .................................................... 22
10. Replacement parts and wearing parts 22
11. Technical data ........................................ 22
14