Once the scan has inished the unit will select the irst alphanumerically
found station. to explore the found stations, press
Full scan
The full scan will search for the entire DAB Band III channels. After
the scan has inished, the irst alphanumerically found station will be
automatically selected.
1. To activate auto scan, press SCAN/►/II and the display will show
"Scanning ..." and a progressing slide bar.
2. All the stations that have been found will be
stored automatically. To explore and listen to
.Then press ENTER conirm into stations.
the found stations, press
Then press ENTER conirm into stations.
Manual tuning
As well as the auto tune function, you can manually tune the receiver. This
can help you when aligning your aerial or when adding stations that were
missed while auto tuning.
1. Press ENTER to select Manual tune.
25. I►► Button
14. I◄◄ Button
2. Press
channels, which are numbered from 5A to
13F.
3. After your desired channel number is
selected, press ENTER to conirm. The
display will show the multiplex.
4. Press MENU again to add selected channel to station list.
Secondary services
You may see a ">" symbol after the name of the station, this indicates that
there are secondary services available to that station. These secondary
services contain extra services that are related to the primary station. e.g.
a sports station may want to add extra commentaries. The secondary
services are inserted directly after the primary station in the station list.
To select the secondary station, press MENU when the ">" appears in the
display before the station name. When the secondary service ends, the unit
will automatically switch back to the primary station.
Preset stations
You can store up to 30 of your favourite stations to the memory. This will
enable you to access your favourite stations quickly and easily.
1. To store a preset, you must irst go back listening to the station that you
would like to save, press and hold MEMORY. The display will show
"Preset Store <#: (Empty)>".
14
I►►
25. I►► Button
14. I◄◄ Button
to cycle through the DAB
conirm selection.
Select loder up in CD or USB mode.
I►►
conirm selection.
14. I◄◄ Button
to select.
conirm selection.
Select loder up in CD or USB mode.
25. I►► Button
.
conirm selection.
Select loder up in CD or USB m
DAB
< Manual tune >
Manual tune
< 5A 174 928MHz >
I►►
conirm selection.
Select loder up in CD or USB mode