Scansonic DA 310 Serie Manual De Instrucciones página 21

• Press REPEAT once, "REP_ONE" will show on the display, It will play
the current track repeatedly.
• Press REPEAT twice, "REP_ALBUM" will show on the display. It will
play the current folder repeatedly.
• Press REPEAT three times, "REP_ALL" will show on the display. It will
play all iles repeatedly.
Press REPEAT once more again, the repeat function will turn off.
•
AUX operation
1. There is a AUDIO IN socket located at the front of the unit. Analogue
audio sound signals from other sources can be input to the unit through
this socket.
2. Connect the input to another audio device via an AUX cable (not
included) with AUDIO IN socket.
3. Press MODE repeatedly on the unit or press AUDIO IN on the remote
to select AUX mode.
4. Turn VOLUME on the unit or press VOL +/– on the remote control to
adjust the volume control for your desired sound output level.
5. In AUX mode, operate your audio device directly for playback features.
• When connecting the external audio device, refer to the owner's
manual of the external device, as well as the manual.
• Examples of External Audio Device that can be connected to
the unit are: Portable MP3 Players, Cassette Players, Mini Disc
Players, DVD Players, etc.
4-hours playback:
1. If the unit is in AUX mode more than 4 hours, it will automatically
switch to standby mode.
2. 10 minutes before entering standby, "AUTO-OFF" will lash on the
display.
3. Press INTRO to continue cancel auto off function.
Maintenance
Cleaning the unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
21