Scansonic DA 310 Serie Manual De Instrucciones página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 148
The unit will automatically switch between stereo and mono mode,
but you can override this and switch this function manually. This is
helpful when receiving poor signal reception.
Preset stations
You can store up to 30 of your favourite stations to the memory. This will
enable you to access your favourite stations quickly and easily.
1. To store a preset, you must irst be listening to the station that you
would like to save, press and hold MEMORY. The display will show
"Preset Store <#: (Empty)>".
2. Press PRESET to select your desired preset station number.Then
press ENTER conirm.
3. The station will be stored in few seconds and the screen will then show
"Preset # Stored".
Recalling a stored station
1. Once you have saved a station to one of the preset buttons, you can
recall it by pressing MEMORY.
2. Press PRESET until your desired station show on the display; Then
press ENTER conirm.
The stored stations will be saved into the memory and power off will
not erase it. Storing a new station into a preset location will erase
the previously station in that location.
FM display modes
Press DISPLAY on the remote control, the display will switch through the
following display modes.
The information of each display mode is displayed on the lower segment of
the display.
Radio Text
This is a scrolling message displaying information
about the current programme.
Programme Type
This describes the "style" or "genre" of the
programme that is being broadcast.
Radio Text
Programme Type
Station Name
Audio Type
17

Publicidad

Tabla de contenido
loading

Tabla de contenido