Scansonic DA 310 Serie Manual De Instrucciones página 16

DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that the broadcaster may
include with their transmissions. The message usually includes information,
such as programme details etc.
Programme Type
This describes the "style" or "genre" of the programme that is being
broadcast.
Audio Bit Rate
The display will show the digital audio bit rate being received.
Frequency
This displays the frequency of the present station, such as "11C
220.352MHz".
FM operation
Switching from DAB to FM mode
To switch the unit to FM mode, press MODE repeatedly to select FM mode.
The display will show the frequency.
Auto scan
Press SCAN/►/II until the tuner starts searching for a station. To scan
down the frequency band, press and hold SCAN/►/II. Once a station has
been found, the scanning will stop automatically.
The search may not stop at a station with a very weak signal.
Manual scan
To search for FM stations manually, press
desired frequency is reached.
With FM radio it may be necessary to ine tune each station by
14. I◄◄ Button
pressing
frequency by 0.05 MHz. If reception is still poor adjust the position
of the aerial or try moving the radio to another location.
Audio mode
Press SELECT/MONO/ST. on the remote control to toggle between the
Stereo or Mono selection.
16
I◄◄
25. I►► Button
repeatedly. Each press/tap will adjust the
conirm selection.
Select loder up in CD or USB mode.
I◄◄
25. I►► Button
14. I◄◄ Button
repeatedly until your
conirm selection.
Select loder up in CD or USB mode.