Stand-Alone Mode - Luxibel LX102 Manual Del Usuario

Use the <UP> and <DOWN> buttons to navigate the menu map and menu options. Press <ENTER> to
access the menu function currently displayed or to enable a menu option. To return to the previous
option or menu without changing the value, press the <MENU> button.
7.2 Menu Functions
menu sub-menu
...
...
7.3

Stand-Alone Mode

Auto Mode
1. Press <MENU> until
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to select the desired program (
4. Press <ENTER> to confirm your selection.
5. Set the speed of built-in programs via <UP> or <DOWN> (
6. Press <MODE> to confirm your selection.
Preset Colours
This device has pre-programmed static colours.
1. Press <MENU> until
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to select the desired program (
4. Press <ENTER> to confirm your selection.
Custom Static Colours
This device allows you to create custom static colours.
1. Press <MENU> until
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to scroll through the options:
... = warm white intensity (
o
... = cold white (
o
... = strobe speed (
o
4. Press <ENTER> to select the desired sub-menu and use <UP> or <DOWN> to change the value.
5. Press <ENTER> to confirm the setting.
6. Press <ENTER> again to exit the menu.
V. 01 – 06/06/2012
function
built-in programs
speed
address
channel mode
dimming speed
colour mixing
warm white
cold white
strobe speed
is displayed.
is displayed.
is displayed.
~
...) intensity (
(off) ~
LX102
description
select between switching and fading built-in programs
set speed of built-in programs (
set DMX address (
select 2-channel DMX mode
select 3-channel DMX mode
select 7-channel DMX mode
no dimming speed
fast dimming speed
middle dimming speed
slow dimming speed
select between 9 static colours
dimmer ( ~
dimmer ( ~
add strobe effect (
~
~
, from 0 to 100%)
~ , from 0 to 100%)
(max.))
6
~
~ )
)
)
~ )
).
~ )
).
©Velleman nv
)