Section
Bluetooth Telephone
07
Taking a phone call
Answering an incoming call
Even when a source other than Telephone is
selected or when this unit itself is turned off,
you can still answer incoming calls. If you set
this unit to automatically answering incoming
calls, refer to Setting the automatic answering
on page 46.
1
When a call comes in, press
MULTI-CONTROL.
# You can also perform this operation by press-
ing OFF HOOK on the remote control.
# If the private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
2
To end the call, press PHONE.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
# You may hear a noise when you disconnect
the phone.
# You can also perform this operation by press-
ing ON HOOK on the remote control.
Rejecting an incoming call
You can reject an incoming call. If you want to
set this unit to automatically rejecting all in-
coming calls, refer to Setting the automatic re-
jecting on page 46.
% When a call comes in, press PHONE.
The call is rejected.
# The rejected call is recorded in missed call
history list. About the missed call history list,
refer to Using the Call History on page 43.
# You can also perform this operation by press-
ing ON HOOK on the remote control.
34
En
Answering a call waiting
If while you are talking on the phone another
call comes in, the number (or name if it is in
your phone book) of the new caller appears in
the display to signal that you have a call wait-
ing. You can put the first caller on hold while
you answer the call waiting, or you can choose
to reject the call, in which case the number is
logged as a missed call.
1
Press MULTI-CONTROL to answer a call
waiting.
# You can also perform this operation by press-
ing OFF HOOK on the remote control.
# Pressing MULTI-CONTROL switches between
callers on hold.
2
Press PHONE to end all calls.
Pressing PHONE ends all calls including a call
waiting on line.
# You can also perform this operation by press-
ing ON HOOK on the remote control.
# Except for switching between the calls on line,
you cannot end each call waiting individually.
Pressing PHONE ends all calls.
Rejecting a call waiting
If you would rather not interrupt your current
call to answer a call waiting, you can reject it
and have the number added to the missed call
history list.
% Press PHONE to reject a call waiting.
# You can also perform this operation by press-
ing ON HOOK on the remote control.