Parts Description; Before First Use; Installation Of The Appliance - Tristar SZ-1916 Manual De Usuario

instruction manual

PArtS DEScriPtioN

1. On/off switch 7. Dust compartment
2. Upper handle 8. Electric turbo brush
3. Hinge 9. Charging base
4. Release button 10. Charger
5. Base 11. Release button bend
6. Filter holder
2
1
11
4
1
5
8
8
vacuum cleaner
10
6
7

BEForE FirSt uSE

installation of the appliance

• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Place the holder of the charging base on to the foot.
• Place the electric turbo brush on the device, make sure that the you plug
the contact points of the brush in the recesses of the device.
• Connect the charger to the charger.
charge
• Hang the device on the charging station. Note: Always make sure that
the device is turned off. The indicator lights will come on once the device
has made contact with the charging station.
• It takes 16 hours to fully charge the batteries before the first use.
• When the device is totally discharged, approximately 14-16 hours charging is
required for the battery to regain full capacity.
• In order to ensure that it is always ready for use, the device should be left on
charger when not being used.
• The adaptor may become warm during charging, this is normal.
3
uSE
• You should regularly check that the nozzle cushions and the brush roller are
clean in order to avoid scratching sensitive floors.
• Start the device by pushing the on/off button away from you.
• For tables, furniture and car seats you can remove the hand unit
by pressing in the release button. The hand unit will now come free and
can easily be removed.
• The crevice nozzle can be fitted in order to reach awkward places.
9