Parts Description; Before The First Use; Cleaning And Maintenance - Tristar SZ-1903 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
instruction manual

PartS deScriPtion

1. On/off switch pedal
2. Handle
3. Cord rewinding pedal
4. Front cover
5. Hose socket
6. Parking hook
7. Wheel
8. Power cord
9. Combi nozzle
10. Tube
11. Hose
7
4
All manuals and user guides at all-guides.com
vacuum cleaner
5
4
1
3
2
8
6
11
9

Before the firSt uSe

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Place the floor brush on the telescope tube. Place the tube with the side of
the hose coupling in the hose connection of the vacuum, if you hear a click,
this just confirmed.
• To disconnect the hose press the button of the hose coupling.
• Using the button on the floor brush in the desired position, with or without
a brush on the bottom of the floor brush.
• Always make sure that all the filters and the dust bag are correctly fitted
before using the appliance. Damaged or incorrectly fitted filters or dust bag
may cause damage to the appliance.
• Pull out the main cable to the full length and plug into the main supply.
Note that you don't exceed the red mark when pulling out the cord. The
yellow mark shows you the ideal length of the cable.
uSe
• Pull the cord entirely from the vacuum and place it into a wall outlet. Press
the On/off button and start your vacuum cleaner.
• To turn the unit off, press the on/off button again. Unplug the power cord
and press the cable rewind button. You can use the storage clip to store the
vacuum bar when you store the vacuum cleaner.

cleaning and maintenance

• You need to empty the dust bag when the dust full indicator lights.
• Do this immediately otherwise it loses much suction power.
• To ensure the best suction of the vacuum cleaner you have to clean the filter
regular.
10
• Remove the cover on the back of the device and remove the filter.
• Clean the filter and cover with lukewarm water, allow the parts to dry
completely before you put it back. These parts are not dishwasher-proof.
• The vacuum cleaner and the other parts you can use a damp cloth to decline.

Publicidad

Tabla de contenido
loading

Tabla de contenido