Philips Respironics DreamWear Manual De Instrucciones página 4

Putting on the Mask
With the mask assembled (see Assembly section), place the cushion under the
nose.
Position the frame on the top of the head.
Tip: For proper sizing, see Cushion sizing and Mask frame selection sections.
Pull the headgear over the back of the head.
Adjusting the Mask
Peel the headgear tabs away from the fabric. Adjust the straps length. Press the
tabs back against the fabric to reattach.
Note: Do not overtighten the headgear. Signs of overtightening include redness,
sores, or bulging skin around the edges of the mask.
Position the mask until it fits comfortably.
When finished the elbow should rest at the top of the head.
4