Before First Use; Temperature Selection - Domo DO601ED Manual De Instrucciones

Ocultar thumbs Ver también para DO601ED:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
DO601ED-602ED
blanket.
• Don't let incontinent people use the blanket.
• The blanket isn't meant to be used in a hospital.

BEFORE FIRST USE

Before using the blanket for the first time, you need to do the following: unwrap
the blanket carefully and remove all packaging materials. Keep the packaging
(plastic bags and carton) away from children. Check the blanket after unpacking
for visual damage, possibly caused by transport.
Never use the blanket when it is folded, wrinkled or tucked in.
Don't place any artificial heat sources, heavy and/or sharp objects on the electrical
blanket.
The electrical blanket has an overheating protection. This protection prevents the
overheating of the blanket over the whole surface, by cutting the power when a
malfunction occurs.
Keep in mind that the blanket cannot be used anymore after this and needs to be
returned to your vendor.
USE OF THE ELECTRICAL BLANKET
Spread out the electrical blanket evenly over your mattres, starting at the foot of
your bed.
The electrical blanket cannot be folded, tucked in or laid around the mattress.
Now place the sheets on the bed, like you normally do. This way the electrical
blanket is situated between the mattres and the sheets.
Always make sure the electrical blanket is straight and doesn't get wrinkled up or
gets folded during use, especially when you have an adjustable bed or a mattres
which consists of more than one part. Make sure to check the blanket when you
make up your bed, the electrical blanket can only be used when it is laid out flat.
We recommend to turn on the electrical blanket 90 minutes before going to bed
and to cover the blanket with your quilt or with the covers, to prevent the heat
from escaping.
Caution: not suited for use on water beds.

TEMPERATURE SELECTION

The quickest way to heat up the blanket is to select the highest temperature setting.
If you need less warmth afterwards you can lower the temperature setting. When the
electrical blanket is turned on the led light inside the switch will light up.
30

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Do602ed

Tabla de contenido