Before The First Use - Domo DO635V Manual De Instrucciones

PARTS
1. Switch with 3 heat settings
2. Indication of heat setting
3. Inner lining
4. Outside

BEFORE THE FIRST USE

· Remove all packaging materials and any promotional stickers before using the appliance for the first
time. Make sure that children do not play with the packing materials.
· After unpacking, carefully check the foot warmer for external damage that may have occurred during
transport.
· Never use the foot warmer when folded, bent, turned down, and/or tucked in.
· Do not place artificial heat sources, heavy and/or angular objects on the foot warmer.
· There may be a slight odour from the foot warmer when the appliance is used for the first time. This is
normal. It is recommended that the room be ventilated briefly after the first use.
USE
1. Plug the power cord into a socket.
2. Turn on the appliance by setting the switch to the desired temperature.
· 0 = off
· 1 = low temperature
· 2 = medium temperature
· 3 = high temperature
3. When you are no longer using the appliance, set the switch back to 0 and unplug it from the wall
outlet.
Tips
· It takes an average of 15 minutes to warm up the foot warmer. The quickest way to heat the foot
warmer is to set the highest heating position first. If you want less heat afterwards, you can switch
back to a lower heat setting.
· After 90 minutes, the appliance will automatically switch off. If you still wish to use the foot warmer for
a longer period of time, set the switch to 0 for about 5 seconds. You can then use the appliance again.
! Attention: the foot warmer is equipped with overheating protection. This protection prevents the foot
warmer from overheating across its entire surface by automatically switching off the power in the event
of a malfunction. Please note that the foot warmer may not be used afterwards for safety reasons and
must be returned to your retailer.
20
DO635V
2
1
3
4