VOLTWERK VS 3 Instrucciones De Servicio página 95

5 Installation
32
(1)
4. Connect the wires on end piece (2) and screw them in
(0.9 Nm).
(1)
(3)
5. Push the end piece (2) onto the plug housing (1). Make
sure that both locking units click in place. A double-
clicking noise confirms a correct connection.
6. Tighten the housing screws (3). The cable must be firmly
seated.
Operating manual
(2)
PE
(2)
Voltwerk VS 3, 4, 5