CONTROL PANEL
Buttons
Rotisserie
Time
Top
heating
Preset
Temper-
Bottom
ature
heating
INSTALLATION
Before first Use
1. Remove all packaging materials, stickers and labels.
2. Clean the basket and all other accessories with hot water, dishwashing liquid, and
a non-abrasive sponge.
3. Wipe the inside and outside of the
appliance with a cloth.
4. A slight odour and smoke may occur
when the unit is first used. These are
caused by production residues. This is
normal and disappears after a short
time.
5. Install the air outlet partition wall board
manually, and apply anti-tear glue on
the two screw heads before using the
appliance (see figure on the right).
Installation site
• Place the appliance on a horizontal surface.
• Keep at least 10 cm away from the back and sides of the appliance and keep it
away from curtains, wall coverings, and other combustible materials.
Digital
display
Light
screen
Manual
Program selection
Control knob
with ON/OFF button
EN
23