Johnson 40-6001 Manual De Instrucciones página 12

Measurement Reference Position
Default measurement setting is from the rear of the instrument for all
modes. Be sure to adjust the measuring reference position prior to
engaging a measuring calculation mode. Press
the reference point options
Front
Middle - Tripod Thread (Size 1/4"-20 )
Rear
Single Distance Measuring
Press 1 X to power up.
Direct Laser Beam to Target.
Press 1 X.
Record measurement (up to 10 measurements will
be stored automatically and available for recall, see
Memory Recall page 22).
Press & Hold
12
1 X to power down
to scroll through
Indicator for reference
©2010 Johnson Level & Tool - Rev. 1
Tripod
Thread