Johnson 40-6001 Manual De Instrucciones página 14

Press measure button 1 X to
activate laser.
Press measure button 1 X to
record second measurement.
Press 1 X to add measurement 1
(Stored in sub value position) and measurement 2 together.
To add second measurement again (duplicate same measurement) to
total simply.
Press button as many time as necessary or to subtract the value
press button.
Continuous Measuring & Min/Max Measuring
This mode will take continuous measurements as you
move closer or further away from the target. Minimum
working range 10-inches. Maximum Range 165-feet.
Press and hold
The Continuous Measure
End Continuous Measure: Press
14
measure button 1 X.
will appear on screen.
Flash twice to confirm
subtraction
Measure 1 X.
©2010 Johnson Level & Tool - Rev. 1
Result on sub-screen
Normal Measuring Mode
Switch to Continuous
Measuring Mode
Operating in Continuous
Measuring Mode