Johnson 40-6001 Manual De Instrucciones página 21

Stake-out
Stake-out mode is designed to mark off repetitive equal distances. For
example, fence post installation or framing.
1. To use Stake-out, you have to set one value or "stake" in
memory.
2. Turn the unit on.
3. Press
4. Press
5. Press
6. Hold
7. Hold
8. Once value is set, press
9. Pressing
After the stake is set, N1 will display on screen.
Enter Continuous Measuring Mode. An arrow will
guide direction. When approaching the set stake,
it will alert you by beeping. This function can be
stopped by pressing the red power button
©2010 Johnson Level & Tool - Rev. 1
three (3) times to enter the first stake setting.
to increase your value.
to decrease your value.
for one second to shift to left.
for one second to shift to right.
and at same time will restore zero.
to enter.
.
Setting N1
Screen show direction
and N1
21