Johnson 40-6001 Manual De Instrucciones página 20

Indirect Measurement 3
Press Indirect Measure Button 3 X to enter Mode.
Aim laser at targeted measuring surface observe flashing line on screen.
Press measure button to record first measurement.
Aim laser at second target, observe flashing line on screen.
Press measure button to record second measurement.
Aim laser at third target observing flashing line on screen. Use the level
vial to ensure an accurate 90º measurement.
Press measure button to record second measurement.
Pythagoras calculation (partial height) will be presented in sub-value
position at top of screen.
Note: Unit of measure for each Pythagoras function is capable of being
displayed in decimal (feet, inches or metric) or inches + feet to 1/32.
Simply press
20
(3 shot measurements PARTIAL Height)
measure button to scroll through each type.
©2010 Johnson Level & Tool - Rev. 1