Cobra G100 Manual Del Usuario página 17

7 - HOW TO CONFIGURATE POSITIVE PERIMETRICAL INPUT.
Enable line 6 on the basic tables function following the instructions written
on the reverse side (see paragraph 15 on "How to programme the G100
system" on www.cobra-at.com)
8 - ALARM RECORD.
When it is being disarmed, the system reports if there has been an
alarm by four acoustic and visual signals emitted by the direction
indicators and buzzer. Pay attention to the LED signals that remain
available until the next time the system is armed or until the ignition is
turned on. The signals (number of flashes) identify the cause of the
alarm.
G100 USER AND FITTING INSTRUCTIONS
06DE2245D OK.pmd
GB
17
9 - SYSTEM'S TECHNICAL CHARACTERISTICS.
WARNING !
This product is configurated to meet the requirements of
the European Directive for alarm systems. Utilisation of
the buzzer function is allowed only for markets outside
the European Community only. Activating this function
invalidates the EC Declaration of Conformity.
09/09/2008, 10.06
17