Before The First Use; Special Safety Instructions For This Machine - Tristar MX-4162 Manual De Usuario

Before the firSt uSe

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz)
• Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
SPecial SafetY inStructionS for thiS
machine
• Only operate this machine under supervision.
• Do not interfere with any safety switches.
• Do not insert anything into the rotating hooks while the machine is
working.
• Place the machine on a smooth, flat and stable working surface.
• Do not insert the mains plug of the machine into the power socket
without having installed all the necessary accessories.
uSe
• In order to lift the arm, push the lift button. The arm will now move upwards.
• Remove the mixing bowl by turning it anticlockwise.
• Mount the required utensil by inserting the top into the output shaft
and lock it by turning the utensil anticlockwise.
• Now fill the mixing bowl with your ingredients.
• Install the mixing bowl by turning it clockwise until it is locked.
• Lower the arm by using the lift arm and press the arm down.
• Insert the mains plug into a properly installed safety power socket.
• Switch on the machine by using a speedlevel between 1 and 5
(corresponding to the mixture and accessory which is used).
• For pulse operation (kneading at short intervals), use the "PULSE"
button.
• After kneading/stirring/whisking use the "OFF" button to turn off the
appliance. Then remove the mains plug.
• Press the lift button downwards and the arm will be raised.
• The mixing bowl can now be removed by turning the bowl
anticlockwise.
• Remove the mixture out of the bowl with the help of a spatula.
• Clean the parts as described under "Cleaning" .
the appliance will automatic switch to the off mode according to the
table below
Speed Setting Default Timer
1 90 sec.
2 6 min. 30 sec.
3 9 min.
4 9 min.
5 9 min.
how to remove and install the dough hook, whisk or beater
• Install: make sure the utensil fits properly in the notches of the shaft,
push and turn it anti clockwise
• Remove: push and turn it clockwise.
Multi mixer with bowl
EN
5