EN
INSTRUCTIONS
9
GROUP I CAR BELT
installation for
cHildren's WeiGHt
BeWteen 9-18KG
a. slide switch and open
handle at the top of seat back
as shown in picture (1)
B. recline seat to maximum
position, then pull the Vehicle
belt out and guide it through
top lock-off device and two red
belt guides at the both sides of
seat base as shown in picture
(2).
c. Make sure the belt is not
twisted and engage the buckle
tongue in the vehicle seat
buckle this should make a
click noise as shown in picture
(3).
d.Pull the diagonal belt
strongly to tighten upwards,
then close handle and slide
switch as shown in picture (4).