Velleman VRC1601D Manual Del Usuario página 7

d. Deleting All Learned Commands in the Remote Control
Use this function if you would like to delete all learned
commands in the VRC801D.
• Hold the SET key pressed for 3 seconds.
• Select LEARNING using the
or the button and
press OK.
• Select DELETE ALL using the
or the
press OK.
• SURE DELET appears on the LCD. Press OK to confirm. All the learned commands have been deleted.
7. LCD Layout
• Hold the SET key pressed for 3 seconds.
• Select LAYOUT using the
or the button and press OK.
• Select your device first. Next, press the PAGE key to select the page to modify.
• Hold the POWER button pressed to show all possible key functions.
• Select the button(s) you wish to modify. Every press on the button will modify its function. Select the desired function.
• Press SET to save your selection. SUCCESS will be displayed.
• Press EXIT to quit.
8. Macros
A macro is a sequence of commands activated by the press of a button.
a. Setting Up a Macro
• Hold the SET key pressed for 3 seconds.
• Select MACROSET using the
or the button and
press OK.
• Select one of the macros using the
or the
and press OK.
• Select SET UP using the
or the button and press
OK.
• Select your device first and then select the commands
in a sequence (e.g. TV + POWER + AV + DVD +
POWER: simultaneous switch on of your TV, VCR and DVD player).
• Press
to select page 2 and press OK to save the macro. SUCCESS will be displayed.
• Press EXIT to quit.
Remark: - You can store max. 10 commands in one macro.
- Make sure all programmed commands have effect before storing them into the macro. Check each command beforehand.
- All devices require being in operating condition when using a macro, i.e. insert a DVD in the player or a tape in the VCR.
b. Operating a Macro
Press and hold the key and 1, 2 or 3. The programmed sequence will be executed.
c. Deleting a Macro
• Hold the SET key pressed for 3 seconds.
• Select MACROSET using the
or the button and
press OK.
• Select the macro to delete using the
or the
and press OK.
• Select DELETE using the or the button and press
OK.
• SURE DELET appears on the LCD. Press OK to confirm.
The macro has been deleted.
• Press EXIT to quit.
VRC1601D
button and
button
button
7 VELLEMAN