Main Components; On/Off Switch - Skymsen PCI-21G Manual De Instrucciones

Moladora de carne
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The Meat Grinder is equipped with a safety system approved by Brazilian ABNT
NBR 13767:2002 Norm, in order to avoid the grinder operation when the Pan is taken
away.
SIEMSEN has developed a system to at the same time obey the Norm and
allow an easy operation of the machine.
In case the Pan is removed ON/OFF Switch will be incapable of switching the machine
ON.
To operate the machine again will be necessary to place the Pan back in its
correct position.
To remove the Pan just lift Pan hole that is inside the Head Nº01 (Pic.03) and
drag Pan rearwards. ALWAYS DO IT WITH ON/OFF SWITCH AT OFF POSITION.
To place Pan back on the machine just place Pan support onto micro-switch
activating pin first, then drag Pan towards the Head and fit Pan hole in the Head.
ALWAYS DO IT WITH ON/OFF SWITCH AT OFF POSITION.
Picture -01
01
1.2

Main Components:

All components are made with carefully selected materials, in accordance with
Siemsen experience and standard testing procedures.
The Head receives a superficial treatment to isolate and facilitate cleaning.
Knife and plates are made of hardened material to provide a long life cutting quality.
Picture - 02
01
01 - Head
02 - Motor Hosing

03 - ON/OFF Switch

04 - Pan
05- Stomper
06
06 - Locking Ring
07- Thermal Overload Switch
6
02
05
04
07
03
02
This product will be replaced or repaired under warrant y, for a period of (1) year,
beginning from the date of purchase by the original purchaser/user ("End User"), or
eighteen (18) months from the da te of shipment from SKYFOOD's ware house,
whichever expires first.
Accessories wil l be re placed o r repaired under wa rranty, for a period of (30) days,
beginning from the da te of purcha se by th e original purchaser/user ("En d User"), or
eighteen (18) months from the date of shipment from SKYFOOD's wa rehouse, whichever
expire s first.
This warranty shall not take effect until a properly completed and executed WARRANTY
REGISTRATION form has been received by SKYFOOD EQUIP MENT, LLC, within thirty
(30) days from the da te of purch ase. The WARRANTY REGISTRATION is available either
in the Instruction Manual of every Product or at SKYFOOD's website www.skyfood .us. The
End User must fill out the WARRANTY REGISTRATION form and send it to SK YFOOD
according to the instructions p osted on the referred website. Failure to do so will VOID
the warranty.
No extended warranties for third party products. There are no other express
warranties or conditions othe r than the one offered by each manufacturer for
products sold by SKYFOOD, not under the FLEETWOOD by SKYMSEN and
SKY MSEN brand.
For questions or assistance, do not return the p roduct or accessories to the store, please
call Toll Free 1-800-503-7534, or visit the Customer Service section at www.skyfood.us.
For faster service please have th e items name , serial number, and proof of purchase for
the operator to assist you.
SKY FOOD reserve s the right to change the term s of its limited warranty at any time
without any prior notice. It also reserves the right to change the design and
specifications of its equipment or any related documentation at any time. The e nd
user is not entitled to upgrades or refunds resulting from these changes.
Updates
These Terms and Conditions were last updated on January 14
th
, 2014.
27

Publicidad

Tabla de contenido
loading

Tabla de contenido