Specific Safety Rules - Makita 4326 Manual De Instrucciones

ENGLISH
(Original instructions)
1 Cutting action changing lever
2 Switch trigger
3 Lock button
4 Speed adjusting dial
5 Blade holder
6 Bolt
7 Hex wrench
8 Blade
9 Roller
10 Hook
SPECIFICATION
Model
Length of stroke
Blade type
Wood
Max. cutting
capacities
Mild steel
Strokes per minute (min
Overall length
Net weight
Safety class
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply.
They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
6
Explanation of general view
11 Retainer
12 Base
13 Dust cover
14 Cutting line
15 Edge
16 Graduation
17 Starting hole
18 Hose
19 Steel base type
20 Rip fence (Guide rule)
4326
18 mm
65 mm
6 mm
–1
) 3,100
217 mm
(Steel base type)
223 mm
(Aluminum base type)
1.8 kg
(Steel base type)
1.9 kg
(Aluminum base type)
4327
18 mm
B type
65 mm
6 mm
500 – 3,100
217 mm
(Steel base type)
223 mm
(Aluminum base type)
1.8 kg
(Steel base type)
1.9 kg
(Aluminum base type)

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher-
ence to jig saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
1. Hold power tool by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord.
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
2. Use clamps or another practical way to
secure and support the workpiece to a stable
platform.
GEA010-1
body leaves it unstable and may lead to loss of con-
trol.
3. Always use safety glasses or goggles. Ordi-
nary eye or sun glasses are NOT safety
glasses.
4. Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5. Do not cut oversize workpiece.
21 Aluminum base type
22 Guide facing
23 Fence guide
24 Threaded knob
25 Pin
26 Anti-splintering device
27 Protrusions
28 Aluminum base
29 Cover plate
4328
18 mm
65 mm
6 mm
500 – 3,100
217 mm
1.8 kg
/II
Cutting accessory contacting a "live"
Holding the work by hand or against your
4329
18 mm
65 mm
6 mm
500 – 3,100
223 mm
1.9 kg
GEB016-2