Specific Safety Rules - Makita 4350T Manual Del Usuario

ENGLISH
1 Cutting action changing lever
2 Switch trigger
3 Lock button
4 Speed adjusting dial
5 Tool opener
6 Blade clamp
7 Jig saw blade
8 Protrusions
9 Base
10 Hex wrench
SPECIFICATIONS
Model
Length of stroke............................................................. 26 mm
Max. cutting capacities
Wood.......................................................................... 135 mm
Steel........................................................................... 10 mm
Aluminum ................................................................... 20 mm
Strokes per minute (min
Overall length ................................................................ 236 mm
Net weight ..................................................................... 2.6 kg
Safety class...................................................................
• Due to our continuing programme of research
anddevelopment, the specifications herein are subject
to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from
adherence to jig saw safety rules. If you use this
tool unsafely or incorrectly, you can suffer
serious personal injury.
6
11 Cutting line
12 Bolt
13 Graduation
14 Bevel slot
15 Gear housing
16 V-notch
17 Starting hole
18 Dust nozzle
19 Hose for vacuum cleaner
20 Rip fence
–1
) ........................................... 2,800
repeated use) replace
Explanation of general view
4350T 4350CT
26 mm
135 mm
10 mm
20 mm
800 – 2,800
236 mm
2.6 kg
/II /II
1. Hold power tools by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord.
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2. Use clamps or another practical way to
secure and support the workpiece to a stable
platform.
your body leaves it unstable and may lead to loss of
control.
3. Always use safety glasses or goggles.
Ordinary eye or sun glasses are NOT safety
glasses.
4. Avoid cutting nails. Inspect workpiece for
any nails and remove them before operation.
5. Do not cut oversize workpiece.
6. Check for the proper clearance beyond the
workpiece before cutting so that the blade
will not strike the floor, workbench, etc.
7. Hold the tool firmly.
8. Make sure the blade is not contacting the
workpiece before the switch is turned on.
GEB016-2
9. Keep hands away from moving parts.
10. Do not leave the tool running. Operate
strict
thetool only when hand-held.
21 Fence guide
22 Threaded knob
23 Circular guide pin
24 Rule bar
25 Screw
26 Guide rail adapter
27 Guide rail
28 Cover plate
29 Anti-splintering device
4350FCT
26 mm
135 mm
10 mm
20 mm
800 – 2,800
236 mm
2.6 kg
/II
Holding the work by hand or against
Cutting