Treatment Path; Menu Bath Preparation - Astralpool Aroma 1.5-23 Manual Del Operador

5.4.

Treatment path

5.4.1. Menu bath preparation

Starting point „start menu"
-
Mark the menu path „treatment" with the cursor and press enter. The menu „bath
preparation" is opened.
In case of standard fittings (filling via valve warm/cold), please fill the unit at least
-
5 cm above the nozzle level. The filling temperature is indicated. Only afterwards,
the massage programmes can be recalled.
Bath preparation
back
In case of units with „automatic filling", the filling level is selected by marking with
-
the cursor and pressing enter. With the thermostat, the filling temperature can be
adjusted, which is indicated on the display. The cursor is on „stop"if you want to
interrupt the filling and empty the tub again.
Bath preparation
back
(The drawings correspond to any configuration, they could differ from the original display!)
Manual Aroma 1.5-23
Discharge
Programmes
New programme
Filling 1
Filling 2
Discharge
Programmes
New programme
20.04.09 15