Please add cleanser or
disinfectand
Confirm the disinfectant addition with „Ok". The rinsing disinfection is started.
Programme course of the rinsing disinfection after start:
1 min. mixing of the disinfectant substance
-
3 min. residence time
-
3 min. discharge time
-
2 min. rinsing of the piping
-
Information
The programme times of the rinsing disinfection can be modified via „setup" within
certain time limits.
5.5.1.4.
Cleaning programme
The cleaning programme is a hygiene programme which should be executed
-
1-2 times per day. The cleaning programme is similar to the rinsing disinfection
concerning handling and programme course. However, here are considerably
longer residence times for the cleaning with cleanser or disinfectant possible.
During rinsing, pay attention that the pressure control valve is completely
openend.
Select „cleaning programme" and press enter.
The control now calls your attention to the filling of the tub. Is the unit equipped with
an automatic filling, it is automatically filled.
Afterwards, you are instructed to add disinfectant. For this, use a measuring cup.
When handling dangerous material, respect the
manufactuerer instructions!
Mixing of cleanser and sodium hypochlorite (chlorine) can
cause dangerous chemical reactions and is therefore
forbidden.
(The drawings correspond to any configuration, they could differ from the original display!)
Manual Aroma 1.5-23
back
20.04.09
25