Astralpool Aroma 1.5-23 Manual Del Operador página 24

5.5.1.1. Discharge
Select the function field „discharge" with the cursor and press enter. The tub is
-
discharged and afterwards automatically rinsed with clear water.
5.5.1.2. Rinsing programme
Should an additional rinsing be desired, select the function field „rinsing
-
programme" and press enter. The rinsing is executed for 2 minutes.
During rinsing pay attention that the pressure control valve is completely
opened.
Information
The rinsing times of the rinsing programme can be modified via „setup" within the
time limits 2 – 4 – 6 minutes.
5.5.1.3. Rinsing disinfection
The rinsing disinfection is conceived for the necessary hygiene between the
-
baths. Furthermore, it is helping to quickly make the tub hygienically servicable in
case of shorter or middle-term stop phases.
During rinsing pay attention that the pressure control valve is completely
opened.
Select „rinsing disinfection" and press enter.
The control now calls your attention to the filling of the tub. Is the unit equipped with
an automatic filling, it is automatically filled.
Afterwards, you are instructed to add disinfectant. For this, use a measuring cup.
When handling dangerous material, respect the
manufactuerer instructions!
Disinfectant substance:
Quantity par tub filling:
(The drawings correspond to any configuration, they could differ from the original display!)
Manual Aroma 1.5-23
12,5 % sodium hypochlorite, liquid
30 ml
20.04.09 24