Astralpool Aroma 1.5-23 Manual Del Operador página 29

5.6.6.1. Setup rinsing programme
Select menu „setup rinsing programme" and press enter. The function of rinsing
-
time determination is offered.
Rinsing time 2* min (2, 4, 6 min. can be adjusted)
Select the required function, confirm with enter and select the required value by
-
turning the control button and pressing enter again.
5.6.6.2. Rinsing disinfection
Select menu „setup rinsing disinfection" and press enter. The functions residence
-
time and rinsing time are offered.
Residence time
Rinsing time
Select required function, press enter and select the required value by turning the
-
control button and pressing enter again.
5.6.6.3. Cleaning programme
Select menu „setup cleaning programme" and press enter. Following functions
-
are offered:
Automatic filling
Residence time
Rinsing time
Select requested function, press enter and select the requested value by turning
-
the control button and pressing enter again.
5.6.6.4. Factory-made settings
In case of too much interference, overview can be lost. Then, the parameters of
-
the setup areas can be readjusted to the starting point.
Select function factory-made settings and press enter. Then, you see the control
-
request, if the control should really adapt the factory-made settings. When you
answer with „Yes", the current setup values are replaced by the factory-made
settings. The factory-made settings are marked by * in the chapters 5.6.
(The drawings correspond to any configuration, they could differ from the original display!)
Manual Aroma 1.5-23
3* min. (3, 6 min. can be adjusted)
2* min. (2, 4 minutes can be adjusted)
(on/off when calling up the programme, option)
30* min (3-120 min. can be adjusted)
4* min (2, 4, 6, 8, 10 min. can be adjusted)
20.04.09 29