Pairing With Another Bluetooth Device; Unpairing From A Bluetooth Device; Sending Data Via Bluetooth; Receiving Data Via Bluetooth - Alcatel cricket DOL 4 Manual De Instrucciones

Pairing with another Bluetooth device

1. From the home screen, tap
2. Slide the Bluetooth switch to the
Your phone automatically scans for and displays the IDs of all available
Bluetooth devices in range. You could tap
again.
3. Tap the device you want to pair with.
4. Confirm that the Bluetooth passkeys are the same between the two devices
and tap PAIR. Alternately, enter a Bluetooth passkey and tap PAIR.
Pairing is successfully completed when the other device accepts the
connection or the same passkey is entered.
Note: The Bluetooth passkey may be fixed for certain devices, such as
headsets and hands-free car kits. You can try entering 0000 or 1234 (the
most common passkeys), or refer to the documents for that device.

Unpairing from a Bluetooth device

You can make your phone forget its pairing connection with another
Bluetooth device. To connect to the device again, you may need to enter or
confirm a passkey again.
1. From the home screen, tap
Bluetooth is turned on.
2. In the list of paired devices, tap
to unpair.
3. Tap FORGET.
58
> Settings > Bluetooth.
position if Bluetooth is off.
> Refresh if you want to scan
> Settings > Bluetooth and make sure
beside the Bluetooth device you want

Sending data via Bluetooth

1. Open the appropriate application and select the file or item you want to
share.
2. Select the option for sharing via Bluetooth. The method may vary by
application and data type.
3. Tap a Bluetooth device the phone has paired with or wait for it to search
for new devices and tap one of them.

Receiving data via Bluetooth

1. Turn Bluetooth on before trying to receive data via Bluetooth.
Note: If the phone has not been paired with the sending device, you may
need to tap your phone's device name in the Bluetooth menu in Settings
to keep the phone detectable through Bluetooth.
2. Swipe down on the status bar and tap
3. Tap ACCEPT to start receiving the data.
Depending on whether a microSD card is installed, received files are stored
automatically in a dedicated folder (Bluetooth, for instance) in the phone
storage or microSD directory. You can access them in the Files. Touch the
received Vcard files, the received contacts (vCard files) will be imported to
your contact list.
.
59