Mounting The Stove; Selecting The Installation Location; Installing The Stove - Dometic ORIGO Serie Instrucciones De Uso

Mounting the stove

7 Mounting the stove
You can fit the stove into the countertop of your kitchen.
7.1

Selecting the installation location

When selecting the installation location, observe the following instructions:
 Select a well-ventilated location for the device.
 Avoid draft at the installation location.
If you fit the stove in an open cockpit or other open areas mount an
additional wind protection.
 Do not operate the device in spaces where danger of explosion is pre-
sent.
7.2

Installing the stove

NOTICE! Danger of damaging the device!
A
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
➤ Cut a rectangular hole into the countertop (dimensions see following
table):
Model
2000
2500
4100
4300
➤ Open the top and remove the canisters.
➤ Place the stove in the middle of the cutout.
➤ Mark the drill holes.
Use the drill holes at the rim of the stove as template.
➤ Pre-drill the holes into the countertop where marked.
➤ Fasten the stove by screwing flat head screws through each drill hole at
the rim.
➤ Place a class B-1 fire extinguisher in reaching distance.
12
Dimensions in mm
345 x 320
345 x 320
575 x 320
575 x 320
Dometic ORIGO
EN