Troubleshooting - Steren RM-7 Manual De Instrucciones

Your brand is not listed
in the code section.
The remote control
do not operate your
device (s)
The remote control
is not performing
commands properly.
The remote control
does not respond after
pressing a key
The indicating LED
does not blink when
you press a key
12 12

Troubleshooting

Problem Solution
-Try the Automatic Search Method.
- Try all the codes listed for your brand. Try
the Automatic Search Method.
- Make sure that the correct key was
pressed. For example. If you want to
control the TV set, make sure that the TV
key was pressed.
- You may be using the wrong code. Try the
next code listed for your brand. Start the
automatic Search Method.
- Make sure you are using new batteries
and they put on the right position. Aim the
remote control, directly to your device.
- Make sure you are using new batteries
and they put on the right position.