Technical Data - REMS Helix VE Instrucciones De Servicio

Ocultar thumbs Ver también para Helix VE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Explanation of symbols
WARNING
Danger with a medium degree of risk which could result in death or severe injury (irreversible)
if not heeded.
CAUTION
Danger with a low degree of risk which can result in minor injury (reversible) if not heeded.
NOTICE
Material damage, no safety note! No danger of injury.
Read the operating instructions before use
Power tool complies with protection class II
Power tool is not suitable for using outdoors
Environmentally friendly disposal
CE conformity mark
1. Technical Data
Use for the intended purpose
WARNING
The power tool is intended for drilling in steel and other metals, stone, wood and plastic, for drilling with REMS tile
drills in ceramics, fine clay, granite and marble, for turning in/loosening screws and for removing burr from pipes
with REMS REG 10 – 42, REMS REG 10 – 54 E. All other uses are not for the intended purpose and are prohibited.
1.1. Scope of delivery
Cordless power drill/ screw driver, Li-Ion rapid charger, battery, 1 bit with double blade slot/cross head, belt
clip (9), operating instructions, carrying bag.
1.2. Article numbers
REMS Helix VE drive unit
Li-Ion 14.4 V, 1.5 Ah battery
Li-Ion 14.4 V, 3.0 Ah battery
Li-Ion/Ni-Cd rapid charger
Li-Ion power supply
Carrying bag
REMS REG 10 – 42, outside/inside pipe deburrer
Driver for REMS REG 10 – 42
REMS REG 10 – 54 E, outside/inside pipe deburrer
REMS tile drill Ø 5 mm
REMS tile drill Ø 6 mm
REMS tile drill Ø 8 mm
REMS tile drill Ø 10 mm
REMS tile drill Ø 12 mm
REMS tile drill Ø 14 mm
REMS CleanM
1.3. Applications
Clamping range quick-clamping chuck
Drilling in steel, stone
Drilling in wood
Drilling with tile drills
Turning in/loosening screws
Operating temperature range
REMS Helix VE
Li-Ion Plus battery
Li-Ion/Ni-Cd rapid charger
190000
571545
571555
571560
571565
190053
113810
113815
113835
181710
181711
181712
181713
181714
181715
140119
0.8 – 10 mm
Ø ≤ 10 mm
Ø ≤ 28 mm
Ø ≤ 14 mm
Ø ≤ 7 mm
0 °C – +60 °C (32 °F – +140 °F)
–10 °C – +60 °C (14 °F – +140 °F)
0 °C – +40 °C (32 °F – +104 °F)
eng
15

Publicidad

Tabla de contenido
loading

Tabla de contenido